|
|
|
|
|
Once the configuration of the device(s) has(ve) been set up and confirmed, the data acquisition can be started.
Note:
1. During the data acquisition, the Synthetic sampling checkbox(es) must be turned OFF.
2. The twilite should be started around 20 seconds earlier than the PET scanner. The clock time of the PET scanner and sampler computer have to be the same.
The curve display area is automatically organized in one or multiple layers (maximum 3), depending on the devices number that have been configured. Each layer corresponds to one device.
The PSAMPLE configuration interface allows the definition of one or multiphase protocol acquisition.