Network Configuration

The TCP/IP connection is automatically set up within the network when both the Sampler and the computer are ON. However, for Windows 7 OS an Alternative configuration set up is requested for proper device functionality.

The twilite IP is available upon the activation of the Info button on the touch screen user interface.

For a device which IP is 10.0.52.25, the set up steps are described below:

1. Control Panel/Network/Network Connection.
2. Select Local Area Connection and double click (1).
3. In the dialog window select Properties (2).
4. In the Local Area Connection Properties window select Internet Protocol Version 4 (TCP/IPv4) (3) then activate Properties (4) button.
5. In the pop up dialog window point to Alternate Configuration tab (5), activate the User configured radio button (6) and for IP address: type 10.0.52.1 while for Subnet mask: type 255.255.0.0
6. Before selecting OK (8), optionally, the Validate settings, if changed, upon exit checkbox (7) can be turned ON.

   

The validation is not absolutely necessary: the connection with the device is working despite the yellow triangle that appears for the local connection. Still, it might take a few minutes until the connection became stable.